|
Epic 630™ Thermal Kiosk Printer
Configuration Mode Overview
There are two ways to configure the TransAct® EPIC 630 printer: the first is to use the manual configuration sequence by using the test keys, and the second is to use TransAct’s remote configuration software. TransAct Technologies offers the use of a remote CONFIG program as a fast, easy way for system integrators to configure or reconfigure your TransAct® EPIC 630 printer. To obtain more information, or the latest version of the CONFIG program, call our Sales Department or Technical Support.
Most Frequent Configuration Incompatibilities
Emulation
RS-232 Serial Interface (baud rate)
Carriage Return Options
How to Change Configuration Settings
Entering into Configuration Mode
1) Press the test button
2) Select configuration mode.
3) Follow the printed instructions.
After you enter Configuration Mode, the printer will print the current configuration, the current totals and the error logs, if any. Save this printout as a guide to changing the configuration, and in case you wish to return the printer to the previous configuration.
Each emulation can have different configurable features. If you are changing the emulation, note that the printout that was printed at the beginning of the configuration process may be incorrect for the new emulation, and the configurable features may be different. If you are using this print out as a configuration guide, and you are changing the emulation, you may wish to save the new emulation and then re-enter Configuration Mode to change other options. This will print all the available features for the new emulation.
|
Fax: 203.949.9048
Printers