This mode allows manual configuration of the printer.
To enter manual configuration mode:
1. Press and hold the FEED button while powering on the printer. Wait for the RED
indicator to blink and then release the FEED button.
2. Press and hold the FEED button until the Paper (Green) LED lights. Then release
the FEED button. Repeat this process until the “Operation – Configuration” Prompt.
3. Press and Release the FEED button to enter Configuration mode.
4. You are now in Configuration Mode.
To navigate the Configuration Mode:
1. Press and release the FEED Button (Short Press) to select the next group or the next item.
2. Press and hold the FEED Button for 2 seconds (Long Press) to select the group or the next item option.
Once all changes are made you must save the configuration
To save the configuration:
1. Press and hold the FEED Button for 4 seconds. Printer will print the revised configuration.
2. Press and release the FEED Button (Short Press) to save the configuration.
3. Printer will reset to a ready state.