Epic 430 Support Topics
The Epic 430 printer is equipped with two interface options, Bi-directional Serial RS-232 and USB. Power and communication connections are made to a connector or connectors located at the rear of the printer.
Epic 430 Support Topics
The correct printer driver depends on what Operating System you are using. You can find the drivers here
Epic 430 Support Topics
Verify the Epic 430 printer has power and is connected to the system or game. This printer is a thermal printer that requires thermal paper. Make sure the paper is loaded properly. See diagram below: Loading Paper The Epic 430 printer uses a continuous roll of POS or...
Epic 430 Support Topics
To find out what firmware is currently in your Epic 430 printer, simply press and hold the FEED button for about 4 seconds (or until all 4 LED lights are lit), and the printer will print out a list of all the current configuration settings in the printer. After the...
Epic 430 Support Topics
The FEED button will provide various functions, depending upon how long it is pressed. Pressing this button will provide one of three functions. The function is time-dependent, and the display indicators will change to indicate the next mode, as follows: The feed...
Epic 430 Support Topics
The “Lang Mon” error is due to the driver’s lack of privileges writing to the registry. If you encounter this error, please use the “TransactPrinterProperties.exe” program found in the Utilities folder that comes with the Windows drivers. Note: You must Right...