Ithaca 280 Support Topics
The Ithaca 280 printer is a thermal printer that requires thermal paper. Verify the paper you are using is thermal paper. Make sure the paper is loaded properly. To load paper, simple drop the paper roll into the printer with the paper coming from the bottom of the...
Ithaca 280 Support Topics
1. Have the printer on and ready. (No error LEDs, only the green ready LED.)2. Connect the printer to the PC via a USB cable. –If a Found New Hardware pop-up Window opens, Click CANCEL.3. Download the iThermInstall.zip Windows driver file from our website...
Ithaca 280 Support Topics
Parallel and serial communications are two distinct ways of getting data from a PC to our printer. Serial communication transmits data on only 2 wires, one for sending and one for receiving one bit at a time. Parallel communication transmits data across multiple wires...
Ithaca 280 Support Topics
The Ithaca 280 printer can be purchased with several different communication interfaces. Please use the below chart to identify which interface your printer has: 9 pin Serial InterfaceCable Required: Serial Null Modem Cable, 9 pin female to 9 pin female.This cable is...
Ithaca 280 Support Topics, Ithaca 9000 Support Topics
The Ithaca 9000 printer has an RJ11 cash drawer port for connecting a cash drawer. This port is hard wired for an EPSON configuration. When purchasing a cash drawer to use with this printer, an Epson cash drawer cable must be ordered. Cash drawer cables are not...
Ithaca 280 Support Topics, Ithaca 9000 Support Topics
The printer will cut the paper when the printer receives the cut command from the system. This command code depends on the Emulation Mode the printer is in. This can be determined by printing a configuration listing. See Manual Configuration for how to print out this...
