Ithaca 280 Support Topics
This mode allows manual configuration of the printer. To enter manual configuration mode: 1. Power the printer off. 2. Hold the Feed button. 3. Power printer on, while still holding the Feed button. 4. Release the Feed button when you see the fast blink red LED...
Ithaca 280 Support Topics
The Model 280 Printers have been equipped with diagnostic test routines which can be used to determine the printer’s functionality. To enter Test Mode: 1. Power the printer off. 2. Hold the Feed button. 3. Power printer on, while still holding the Feed button. 4....
Ithaca 280 Support Topics
Although the Model 280 printers are designed for reliable, trouble-free operation, problems may occasionally occur which are usually easy to correct. The lists below may offer some easy solutions to the problems. If a problem is still unresolved, then it may be...
Ithaca 280 Support Topics
The “Lang Mon” error is due to the driver’s lack of privileges writing to the registry. If you encounter this error, please use the “TransactPrinterProperties.exe” program found in the Utilities folder that comes with the Windows drivers....
Ithaca 280 Support Topics
In Windows 8.1/Windows 10, before installation, please change the “USB Mode” option in the internal configuration of the 280 printer to “USB Printer Only”. See Manual Configuration under the Quick Reference section.NOTE: After you change...
Ithaca 280 Support Topics
The correct printer driver depends on what Operating System you are using. You can find the drivers on our website.
