Epic 430 Support Topics
Printer Status LED’s The Epic 430TM printer has four indicator lights to indicate various operating states of the printer. In general these are Fault, Cover Open, Paper Status, and Ready. The printer may be in normal operation, self test or in one of two boot load...
Epic 430 Support Topics
TEST button The printer has a hidden TEST button on the right side of the Electronics Base. Figure 1. Location of TEST Button Inside Electronics Base. The TEST button is a multifunction button. By pressing and releasing the TEST button, the printer will enter self...
Epic 430 Support Topics
Configuration Mode Overview There are two ways to configure the Epic 430TM printer: the first is to use the manual configuration sequence by using the TEST and FEED key, and the second is to use TransAct’s remote configuration software. TransAct Technologies offers...
Epic 430 Support Topics
RS-232 Serial Interface Serial Port Features The serial port features are as follows: Baud Rates: 300, 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K, and 57.6KBit Patterns: 8-bit no parity; 8-bit odd; 8-bit even; 7-bit no parity; 7-bit odd; 7-bit evenFlow...
Epic 430 Support Topics
Serial Null-Modem Cable Pinouts 9 pin to 9 pin Serial Null Modem Cable – Part # 10-2020 DB-9toDB-91 and 6–42–33–24–1 and 65–57–88–7 Where is Pin 1? Connector: DB-9 Female:
