Ithaca 9000 Support Topics
Self-Test Mode allows you to perform a series of tests to show if the printer is functioning correctly. Self-Test Mode also allows you to print a summary of how your Model 9000 is currently configured. Use this printout to compare your printer’s settings to your...
Ithaca 9000 Support Topics
All Model 9000’s are equipped with a USB 2.0 interface with provisions for an optional interface adapter that will support IEEE 1284 25 pin Parallel, IEEE 1284 36 pin Parallel, RS232 9 pin Serial, RS232 25 pin Serial, Powered USB or Ethernet 10/100-Base-T. USB...
Ithaca 9000 Support Topics
The correct printer driver depends on what Operating System you are using. You can find the drivers here
Ithaca 280 Support Topics, Ithaca 9000 Support Topics
The Ithaca 9000 printer has an RJ11 cash drawer port for connecting a cash drawer. This port is hard wired for an EPSON configuration. When purchasing a cash drawer to use with this printer, an Epson cash drawer cable must be ordered. Cash drawer cables are not...
Ithaca 280 Support Topics, Ithaca 9000 Support Topics
The printer will cut the paper when the printer receives the cut command from the system. This command code depends on the Emulation Mode the printer is in. This can be determined by printing a configuration listing. See Manual Configuration for how to print out this...
Ithaca 9000 Support Topics
The Ithaca 9000 printer is a thermal printer that requires thermal paper. Verify the paper you are using is thermal paper. Make sure the paper is loaded properly. To load paper, simple drop the paper roll into the printer with the paper coming from the bottom of the...
